Message Board
Its structure is composed of a contact type auto-voltage regulator, a servo motor, an automatic control circuit, etc. When the grid voltage is unstable or the load changes, the automatic sampling control circuit sends a signal to drive the servo motor and adjust the auto-voltage regulator carbon brush , The output voltage is adjusted to the rated value and reaches a steady state.
LP-TND/LP-DBW series voltage stabilizers should be used indoors. The ambient temperature is -15℃ ~ +45℃
Altitude does not exceed 1500m, relative humidity <90%
The installation site should be free from gas, steam, chemically deposited dust, dirt and other explosive and corrosive media that seriously affect the insulation of the voltage stabilizer. There should be no severe vibration or bumps in the installation site
Any special use conditions that do not meet the above regulations should be determined by the user through negotiation
Model | Product Size(cm) | Package Size(cm) | Packing quantity | Weight(Kg) |
SVC/TND-0.5KVA | 19x17x13.5 | 44×24.5×35 | 4 | 15 |
SVC/TND-1KVA | 22×20.2×16 | 49×28.5×40 | 4 | 20 |
SVC/TND-1.5KVA | 22×20.2×16 | 49×28.5×40 | 4 | 26 |
SVC/TND-2KVA | 24.5×25.8×19.5 | 60.5x35x25.5 | 2 | 17 |
SVC/TND-3KVA | 23.5x29x23 | 61.5×38.5×29 | 2 | 23 |
SVC/TND-5KVA | 23×31.5×27.5 | 39.5x32x35 | 1 | 13 |
SVC/TND-10KVA (Ultra low pressure) | 31×34.5×53.5 | 45×42.5×62 | 1 | 33 |
SVC/TND-10KVA | 31×34.5×53.5 | 45×42.5×62 | 1 | 36 |
SVC/TND-15KVA | 28x38x77 | 49x40x86.5 | 1 | 52 |
SVC/TND-20KVA | 32.5x38x77.5 | 49×44.5×88.5 | 1 | 59 |
SVC/TND-30KVA | 37.5×41.5×78.5 | 53x49x88.5 | 1 | 74 |
Input voltage | 160V-250V | |
The output voltage | 220V versus 110V (0.5kVA-3kVA) | 220V (5kVA-30kVA) |
Stabilization accuracy | Phase voltage220V±3％ 110V±6％ | |
Frequency | 50Hz /60Hz | |
Overvoltage protection | 246V±4V | |
Adjust the time | <1 second (when the input voltage changes 10%) | |
| Ambient temperature | -10℃~+40℃ | |
Temperature rise | <60℃ | |
Wave distortion | No additional waveform distortion | |
Load power factor | 0.8 | |
Dielectric strength | 1500V/lmin | |
Insulation resistance | >5MQ | |
